[no subject]

The best thing would be a straight Linux software raid with the
controller just adding the hardware interface. That make the drives
portable.

On Mon, 2004-10-11 at 15:54 -0400, Jim Lynch wrote:
> I've have an old compaq that a Windows tech added some disks to but had 
> no idea what to do to make it work on Linux.  From the dmesg listing I 
> found:
> 
> Compaq SMART2 Driver (v 2.4.5)
> Found 1 controller(s)
> cpqarray: Finding drives on ida0 (SMART-2/P)
> cpqarray ida/c0d0: blksz=512 nr_blks=8380320
> cpqarray ida/c0d1: blksz=512 nr_blks=16768800
> cpqarray ida/c0d2: blksz=512 nr_blks=17764320
> 
> It looks like he added ida/c0d2 since I have the other two drives 
> mentioned in the fstab file.  When I tried to look at one of the 
> existing drives with fdisk I found:
> Disk /dev/ida/c0d1: 1 heads, 16768800 sectors, 1 cylinders
> Units = cylinders of 16768800 * 512 bytes
> 
>          Device Boot    Start       End    Blocks   Id  System
> /dev/ida/c0d1p1   *         1         1   2044064   82  Linux swap
> Partition 1 has different physical/logical beginnings (non-Linux?):
>      phys=(0, 1, 1) logical=(0, 0, 33)
> Partition 1 has different physical/logical endings:
>      phys=(500, 254, 32) logical=(0, 0, 4088160)
> Partition 1 does not end on cylinder boundary:
>      phys=(500, 254, 32) should be (500, 0, 16768800)
> /dev/ida/c0d1p2             1         1    391680   83  Linux
> Partition 2 has different physical/logical beginnings (non-Linux?):
>      phys=(501, 0, 1) logical=(0, 0, 4088161)
> Partition 2 has different physical/logical endings:
>      phys=(596, 254, 32) logical=(0, 0, 4871520)
> Partition 2 does not end on cylinder boundary:
>      phys=(596, 254, 32) should be (596, 0, 16768800)
> /dev/ida/c0d1p3             1         1    261120   83  Linux
> Partition 3 has different physical/logical beginnings (non-Linux?):
>      phys=(597, 0, 1) logical=(0, 0, 4871521)
> Partition 3 has different physical/logical endings:
>      phys=(660, 254, 32) logical=(0, 0, 5393760)
> Partition 3 does not end on cylinder boundary:
>      phys=(660, 254, 32) should be (660, 0, 16768800)
> /dev/ida/c0d1p4             1         1   5687520    f  Win95 Ext'd (LBA)
> Partition 4 has different physical/logical beginnings (non-Linux?):
>      phys=(661, 0, 1) logical=(0, 0, 5393761)
> Partition 4 has different physical/logical endings:
>      phys=(1023, 254, 32) logical=(0, 0, 16768800)
> Partition 4 does not end on cylinder boundary:
>      phys=(1023, 254, 32) should be (1023, 0, 16768800)
> /dev/ida/c0d1p5             1         1   5687504   83  Linux
> 
> Which makes me a bit leary of using fdisk on these drives.  Most of that 
> output doesn't make sense to me.  Can anyone point me in the right 
> direction so I can learn how to format this new drive?  This is a RH 7.2 
> system.  If I understand correctly this is a RAID system.  The new 
> drive  is really 2 9 Gb drives configured as a mirror, so I was told.  
> Is there some other utility I need to use to make sense of the 
> partitioning of the existing drives?
> 
> Thanks,
> Jim.
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
&gt; <a  rel="nofollow" href="http://www.ale.org/mailman/listinfo/ale";>http://www.ale.org/mailman/listinfo/ale</a>
&gt; 
&gt; !DSPAM:416ae549140708216720488!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part



</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="00424" href="msg00424.html">[ale] Compaq raid disk.  How do I format?</a></strong>
<ul><li><em>From:</em> hbbs at comcast.net (Jeff Hubbs)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<ul><li><strong>References</strong>:
<ul>
<li><strong><a name="00405" href="msg00405.html">[ale] Compaq raid disk.  How do I format?</a></strong>
<ul><li><em>From:</em> jwl at sgi.com (Jim Lynch)</li></ul></li>
</ul></li></ul>
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg00420.html">[ale] memory questions</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg00422.html">[ale] memory questions</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg00405.html">[ale] Compaq raid disk.  How do I format?</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg00424.html">[ale] Compaq raid disk.  How do I format?</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#00421"><strong>Date</strong></a></li>
<li><a href="threads.html#00421"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>