DSLAMs

[clayton at MNSi.Net (Clayton Zekelman)]

I'd recommend avoiding the C7 - ADSL2+ 
performance on them isn't the best.   Look for 
something with a Broadcom chipset.  Even an old 
Calix B6 would be better than C7 - although the 
B6 gear is getting old, and reliability is 
sketchy.  The power converter modules on board seem to go.

At 01:51 PM 31/12/2019, Shawn L via NANOG wrote:

>That's a tough one.  48 port dslams with 
>internal splitters are easy.  When you're 
>looking for more density you're almost always 
>looking at external splitter shelves.  Could 
>also look at the calix c7 platform -- tons 
>around on the used market -- but then again, no splitters.
>
>
>
>
>-----Original Message-----
>From: "Dennis Lundstr�¶m" <dennis at umnum.ca>
>Sent: Tuesday, December 31, 2019 12:32pm
>To: "Nick Edwards" <nick.z.edwards at gmail.com>
>Cc: "NANOG" <nanog at nanog.org>
>Subject: Re: DSLAMs
>
>Found this one:
><ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf>ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf
>Stating EOL 2015-04-14 for HW revision A1.
>Â?Dennis
>
>On Tue, Dec 31, 2019 at 10:27 Nick Edwards 
><<mailto:nick.z.edwards at gmail.com>nick.z.edwards at gmail.com> wrote:
>Howdy y'all
>
>Chasing some info, does dlink still sell DAS4672 - 672 port adsl2+ dslams?
>
>after simple IP based  units with pppoe pass through.
>We could buy a bunch of planet 48 ports, which we used before, but we
>hoping someone still puts out high capacity (320 plus port) units with
>inbuilt pots splitters
>
>thanks

-- 

Clayton Zekelman
Managed Network Systems Inc. (MNSi)
3363 Tecumseh Rd. E
Windsor, Ontario
N8W 1H4

tel. 519-985-8410
fax. 519-985-8409        
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20191231/c3b260f0/attachment.html>