[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
USB Ethernet Adapters
- Subject: USB Ethernet Adapters
- From: brad at shub-internet.org (Brad Knowles)
- Date: Mon, 14 May 2018 20:53:27 -0500
- In-reply-to: <CAMDdSzMi-x6n6m7k6E=4BToxop_+OxyyH8kZO357mOtkty7sqQ@mail.gmail.com>
- References: <CAMDdSzPyYcyen9osjTnX9d79zfL9sWA_8XXAGw6=TrPGzUpfoA@mail.gmail.com> <CAMDdSzMi-x6n6m7k6E=4BToxop_+OxyyH8kZO357mOtkty7sqQ@mail.gmail.com>
On May 14, 2018, at 8:20 PM, Colton Conor <colton.conor at gmail.com> wrote:
> 1. I like the ones that have lights on the Ethernet port so you can see if
> the device is up/down. I find that critical as we go to a lot of sites
> where we don't know if the cable is good/bad, so a indication on the lights
> is critical.
If you're going to do network testing, then an NETool is recommended. That's a complete Linux network testing system in what looks like a larger-than-usual dongle.
Beyond that, if you're using an older Mac, then in my experience Apple's Thunderbolt 2/GigE adapter can't be beat.
I do not yet have enough experience with USB, or USB-C, or Thunderbolt 3 adapters to be able to make any recommendations.
--
Brad Knowles <brad at shub-internet.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 861 bytes
Desc: Message signed with OpenPGP
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20180514/1b03a042/attachment.sig>