[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Trouble with IPv6 setup on Quagga
- Subject: Trouble with IPv6 setup on Quagga
- From: olipro at 8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa (Oliver)
- Date: Wed, 08 Aug 2012 09:37:26 +0200
- In-reply-to: <CAJ0+aXZK=ghv9_yt3=OJyoVrnFtwDKNwALJXSUdFfUCXNmHE9w@mail.gmail.com>
- References: <CAJ0+aXZK=ghv9_yt3=OJyoVrnFtwDKNwALJXSUdFfUCXNmHE9w@mail.gmail.com>
On Tuesday 07 August 2012 01:08:24 Anurag Bhatia wrote:
>
> router bgp 54456
> bgp router-id 199.116.78.28
> redistribute connected metric 1
> redistribute static metric 1
> neighbor 2607:1b00:10:a::1 remote-as 54456
> neighbor 2607:1b00:10:a::1 next-hop-self
>
> address-family ipv6
> network 2607:1b00:d1::/48
> network 2607:1b00:d2::/48
> neighbor 2607:1b00:10:a::1 activate
> exit-address-family
Specifying "next-hop-self" in the general BGP router config section is
equivalent to specifying it purely for IPv4 routes; you need to specify next-
hop-self in the IPv6 address-family section.
Regards,
Oliver