[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ipv6 transit over tunneled connection

Subject: ipv6 transit over tunneled connection
From: graham at apolix.co.za (Graham Beneke)
Date: Sat, 15 May 2010 10:56:36 +0200
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]>

On 2010/05/14 03:39 AM, Christopher Morrow wrote:
> 3) don't tunnel beyond your borders, really just don't

We have managed to achieve that fairly well. We have colocated a single 
router in a provider in London with native IPv6 where we have our 
primary break out. We then tunnel over IPv4 between this router and our 
core.

The tunneling protocol provides transparent L2 frame reassembly so we 
have MTU 1500 all the way to the edge of the network.

-- 
Graham Beneke
graham at apolix.co.za   | Apolix Internet Services
Tel : +27-87-550-1010 | http://www.apolix.co.za/
Cell: +27-82-432-1873 | PO Box 1120
Skype: grbeneke       | Melville, 2109

References:
- ipv6 transit over tunneled connection
  - From: mulitskiy at acedsl.com (Michael Ulitskiy)
- ipv6 transit over tunneled connection
  - From: morrowc.lists at gmail.com (Christopher Morrow)

Prev by Date: Stand alone voltage/etc monitoring?
Next by Date: ipv6 transit over tunneled connection
Previous by thread: ipv6 transit over tunneled connection
Next by thread: ipv6 transit over tunneled connection
Index(es):
- Date
- Thread