[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Unicast Flooding

Subject: Unicast Flooding
From: ler762 at gmail.com (Lee)
Date: Thu, 18 Jun 2009 12:28:44 -0400
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>

On 6/18/09, Brian Shope <blackwolf99999 at gmail.com> wrote:
> Thanks for all the good info..
>
> So it sounds like changing my CAM timeout to 4 hours is the best
> suggestion.  Anyone have any problems when implementing this?

Not as long as all the user ports have portfast enabled.  Without
portfast, when a port goes up or down it causes a topology change
notification which sets the fast aging timer and the cam table entries
age out in something like 15 seconds.

Regards,
Lee

Follow-Ups:
- Unicast Flooding
  - From: sking at kingrst.com (Steven King)

References:
- Unicast Flooding
  - From: blackwolf99999 at gmail.com (Brian Shope)
- Unicast Flooding
  - From: mhuff at ox.com (Matthew Huff)
- Unicast Flooding
  - From: dholmes at mwdh2o.com (Holmes,David A)
- Unicast Flooding
  - From: sking at kingrst.com (Steven King)
- Unicast Flooding
  - From: blackwolf99999 at gmail.com (Brian Shope)

Prev by Date: Wireless bridge
Next by Date: Wireless bridge
Previous by thread: Unicast Flooding
Next by thread: Unicast Flooding
Index(es):
- Date
- Thread