[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
J-series and Cisco ME3400 L2 Issues
- Subject: J-series and Cisco ME3400 L2 Issues
- From: cra at WPI.EDU (Chuck Anderson)
- Date: Thu, 12 Feb 2009 07:19:27 -0500
- In-reply-to: <[email protected]>
- References: <[email protected]>
On Wed, Feb 11, 2009 at 11:57:01AM -0600, Brad Fleming wrote:
> We've seen a problem getting Layer2 to function correctly with various
> speed and duplex settings. We tried every combo of hardcoded settings on
> both sides but simply couldn't resolve some L2 errors and interface
> resets. In the end, we found a stable setup with the J-series set to
> auto/auto and the ME3400 set to 100/full.
What were the L2 errors? You might try asking your question on the
juniper-nsp [1] and cisco-nsp [2] lists.
[1] http://puck.nether.net/mailman/listinfo/juniper-nsp
[2] http://puck.nether.net/mailman/listinfo/cisco-nsp