[ale] MoBo works with kernel 2.6.29 but not newer.

[ecashin at noserose.net (Ed Cashin)]

It doesn't *sound* like a hardware problem, but there are
a lot of unknowns.  Maybe you could say a bit more about
what does happen when you try to boot the 2.6.31 kernel.

Do you have a serial console going in case it's a video
compatibility/configuration problem?

On Thu, Jan 27, 2011 at 5:10 PM, Scott Castaline <skotchman at gmail.com> wrote:
> Ok, so I tried setting to boot from the PCIe card using System Rescue
> CD-x86-1.2.3 of August 2009. It booted fine and I was able to start
> Xserver fine with no problems. This is based on kernel 2.6.29, so I
> tried Fedora 11 LiveCD 32bit which is also based on the same kernel
> version and that also worked. Fedora 12 based on the 2.6.31 kernel does
> not work using this configuration. Does anyone have any suggestions as
> to what options I have with this board? Based on this fact I'm back to
> not sure if it's really a hardware problem or a software problem.
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>



-- 
? Ed Cashin <ecashin at noserose.net>
? http://noserose.net/e/
? http://www.coraid.com/