[no subject]

I don't know how much machine you actually need, so this may be entirely
the wrong advice for you.  Maybe it will be useful for someone else :).

I recently, probably a few months ago, helped my girlfriend pick out a
laptop.  We needed to go as cheap as possible, but still get a machine
she could use.

I am aware that there are a lot of $500 laptops advertised all the time,
but they all seem rather flimsy to me.  I decided to start looking
around for a used laptop.  I am sure there are plenty of other good
choices, but I decided on a Toshiba Tecra 8100.  I had one supplied by
an employer once, every piece of hardware worked at the time under Linux
(even the winmodem), and I knew it was a pretty sturdy machine.

I want to say she payed in the neighborhood of about $300 bucks or so,
including upgrading the memory.  It is a P3 700 with a 10ish gig hard
drive.  It came with 2 64 meg sticks, we bought a 256 to replace one of
them for 320 gig.

My work laptop had 512 MB, and I always had a Win2000 VMWare session
opened.  It ran quite well for what I was doing.

The laptop actually is pretty sturdy.  It has already been dropped once,
probably from about 3 feet or so.  I didn't see how it happened, but it
managed to eject the DVD drive, and the drive got a bit bent out of
shape.  The actual drive piece got slightly snapped out of the tray that
it slides on.  I was able to pop it back in, and it is good as new.

I am very happy with the laptop, I think I am happier with it than all
the $500 1.1ghz laptops I saw advertised at the time she bought it (I
think they all needed a memory upgrade, anyway :p).  The only
disappointment of a used laptop is the battery.  They usually don't hold
much of a charge.  She ended up buying a rebuilt battery for it, which
probably pushed the cost up over $350.

I was actually rather impressed.  I loaded Ubuntu Hoary on it, and it
detected everything in the machine except the modem.  I haven't bothered
to hunt down the winmodem driver, though :p.

We also got her a $10 802.11g card, which is working quite well.  I used
ndiswrapper, because I was lazy.  There are native drivers available for it.

Pat
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: OpenPGP digital signature



</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="00153" href="msg00153.html">[ale] Laptop and linux</a></strong>
<ul><li><em>From:</em> timtw at earthlink.net (Tim Watts)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<ul><li><strong>References</strong>:
<ul>
<li><strong><a name="00140" href="msg00140.html">[ale] Laptop and linux</a></strong>
<ul><li><em>From:</em> timtw at earthlink.net (Tim Watts)</li></ul></li>
</ul></li></ul>
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg00151.html">[ale] Laptop and linux</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg00153.html">[ale] Laptop and linux</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg00149.html">[ale] Laptop and linux</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg00153.html">[ale] Laptop and linux</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#00152"><strong>Date</strong></a></li>
<li><a href="threads.html#00152"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>