[no subject]

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   051    Pre-fail 
Always       -       0
  3 Spin_Up_Time            0x0007   060   060   000    Pre-fail 
Always       -       6784
  4 Start_Stop_Count        0x0032   100   100   000    Old_age  
Always       -       23
  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail 
Always       -       0
  7 Seek_Error_Rate         0x000b   253   253   051    Pre-fail 
Always       -       0
  8 Seek_Time_Performance   0x0024   253   253   000    Old_age  
Offline      -       0
  9 Power_On_Half_Minutes   0x0032   100   100   000    Old_age  
Always       -       540h+47m
 10 Spin_Retry_Count        0x0013   253   253   049    Pre-fail 
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age  
Always       -       6
194 Temperature_Celsius     0x0022   127   094   000    Old_age  
Always       -       37
195 Hardware_ECC_Recovered  0x000a   100   100   000    Old_age  
Always       -       1007145
196 Reallocated_Event_Count 0x0012   253   253   000    Old_age  
Always       -       0
197 Current_Pending_Sector  0x0033   253   253   010    Pre-fail 
Always       -       0
198 Offline_Uncorrectable   0x0031   253   253   010    Pre-fail 
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   100   100   000    Old_age  
Always       -       0
200 Multi_Zone_Error_Rate   0x000b   100   100   051    Pre-fail 
Always       -       0
201 Soft_Read_Error_Rate    0x000b   253   253   051    Pre-fail 
Always       -       0

On Mon, 2004-07-12 at 20:49, Stephan Uphoff wrote:
> Chris Fowler wrote:
> > Jul 12 19:10:44 sam2u smartd[1204]: Device: /dev/hdb, SMART Usage
> > Attribute: 194 Temperature_Celsius changed from 133 to 127 
> 
> This is a normalized value - don't try to cook on /dev/hdb ;-)
> Your temperature decreased - this is definedly good.
> 
> A for the absolute temperature or how close you are to the
> max temperature you need to query the drive.
> 
> Try
> smartctl  -a  /dev/hdb 
> and look at the RAW value for the temperature.
> ( Take a look at the manual page for a description of normalized ...)
> 
> 
> 	Stephan
> 


</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="00368" href="msg00368.html">[ale] Is this bad?</a></strong>
<ul><li><em>From:</em> ups at tree.com (Stephan Uphoff)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<ul><li><strong>References</strong>:
<ul>
<li><strong><a name="00366" href="msg00366.html">[ale] Is this bad?</a></strong>
<ul><li><em>From:</em> ups at tree.com (Stephan Uphoff)</li></ul></li>
</ul></li></ul>
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg00366.html">[ale] Is this bad?</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg00368.html">[ale] Is this bad?</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg00366.html">[ale] Is this bad?</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg00368.html">[ale] Is this bad?</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#00367"><strong>Date</strong></a></li>
<li><a href="threads.html#00367"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>